COMPEX SP 8.0 | Compex

Compex Range

COMPEX SP 8.0

Optimaliseert uw kracht en uithoudingsvermogen, helpt u sneller herstellen, terwijl het tevens blessures kan voorkomen en pijn behandelen.

Ontworpen voor atleten die dagelijks trainen. De SP 8.0 is hét topproduct op het gebied van elektrostimulatie.
Connecteerbaar en modulair, de SP 8.0 bevat de gloednieuwe mi-Autorange functie, die u voortdurend betere resultaten brengt.

  • 1 229,00 €

Technische details

MI, GEPERSONALISEERDE STIMULATIE AANGEPAST AAN ELKE FYSIOLOGIE
Uitgerust met de unieke MI (muscle intelligence) technologie, passen Compex-stimulatoren zich aan aan elk van uw spieren om de meest effectieve elektrostimulatie mogelijk te maken, terwijl het een beter comfort en betere prestaties biedt.

 

MI, HOE WERKT HET
 
MI-SCAN
Scant de spier en past automatisch de parameters van de stimulator aan aan uw fysiologie.

MI-ACTION
Optimaliseert de effectiviteit van de sessie door het combineren van vrijwillige contracties met elektrisch gestimuleerd contracties, waardoor u de volledige controle over uw training heeft.

MI-TENS
Maakt het eenvoudiger om voor anti-pijn programma's het stimulatie niveau aan te passen om een optimaal resultaat te garanderen. 

MI-AUTORANGE
Een gloednieuwe functie, waarmee uw Compex module automatisch het meest geschikte niveau van de stimulatie bepaalt en instelt.

MI-functies op alle kanalen / modules

 

Categorieën en programma's

Fysiek preparatie:
Uithoudingsvermogen • Weerstand • Kracht • Explosief kracht • Overcompensatie  • Preventie enkelletsel • Cross training • Core stabiliteit  • Hypertrofie • Bodybuilding • Potentiatie • Opwarming • Capillarisatie

Herstel/Massage:
Herstel na training • Herstel na wedstrijd  • Relaxerende massage • Verminder spierpijn • Regenererende massage

Pijnstilling:
Pijnstilling TENS • Decontractie • Spierpijn  • Nekpijn • Rugpijn • Lumbago • Epicondylitis • Tendinitis • Zware benen • Kramp preventie

Revalidatie: 
Atrofie na immobilisatie • Versterking na immobilisatie

Fitness:
Verstevig uw armen • Verstevig uw dijen • Voor een 6-pack • Voor een sterkere biceps • Ontwikkel uw schouders • Ontwikkel uw borstspier • Versterk uw buik • Vorm uw billen • Body power • Lymfedrainage 

 

Inhoud van de verpakking

Afstandbediening
4 modules
Laad station
Stekker oplader
4 stuks snap electrodes 5x10 cm (dubbele aansluiting)
4 stuks snap electrodes 5x10 cm (enkele aansluiting)
8 stuks snap electrodes 5x5 cm
Reiskoffer
Beschermingshoesje voor afstandbediening
USB kabel
Instructie handleiding

Product details

Boost your performance

Scientific studies available on compex.info

Technical Details
Technologie Draadloos
Muscle intelligence MI-scan, MI-autorange, MI-tens, MI-action op de 4 modules
Web connectie Ja
Download doelstelling Ja
Upload remote history Ja
Programmacategorieën Fysieke voorbereiding, Fitness, Pijnstilling, Herstel / Massage, Revalidatie
Aantal programma’s 40
Aantal kanalen 4
Scherm Matrix kleuren
Power 120 mA, 400 us, 150 Hz
Energie Oplaadbare batterij in minder dan 2u

Instructie video’s

Hoe te gebruiken

It is important to select appropriately sized electrodes (small or large) and to position them correctly on the muscle group that you wish to stimulate in order to ensure effective treatment. It is therefore appropriate to always use the electrode size shown in the illustration. If necessary, try to find the best position possible by moving the electrode on the muscle, until you locate the poin that produces the best contraction, or the greatest comfort is found.

For TENS type programmes, the general rule is to cover the painful area with electrodes.

N.B. Approximate positioning of electrodes makes the session less effective, but is not dangerous.

To view the different ways of placing the electrodes, please click here. For stimulation with the Mi-sensor system, all the suggested placements represent the optimal positioning of this system. It is therefore recommended that you follow these instructions. If you do not want to use Mi- technology, all you need to do is to replace the special electrode cable of the Mi-sensor system with another standard electrode cable.

This position varies according to the muscle group that you wish to stimulate and the programme that you are using.

For programmes inducing powerful muscular contractions (tetanic contractions), it is recommended to stimulate the muscle isometrically. You should therefore hold the extremities of limbs being stimulated.  This position opposes maximum resistance to movement and avoids any shortening of the muscle during contraction, which would risk causing cramps. For example, when stimulating the quadriceps, you should be in a sitting position with ankles held to avoid extending the knees.

For the other types of programmes which do not induce powerful muscular contractions but only muscular twitches or tingling, position yourself as shown on the illustration, maintaining a comfortable position.

On a stimulated muscle, the number of fibres used depends on the stimulation intensity.
For programmes inducing powerful muscular contractions (tetanic contractions), you must use the maximum stimulation intensities (up to 999) while remaining within your tolerance threshold, in order to
use the maximum number of fibres. The progress of a muscle will be greater the higher number of fibres that are worked. During a session it is therefore important to try to increase the intensity every 3 to 5 contractions.
For other types of programmes like recovery, massage, capillarisation or even muscle pain which only induce muscle twitches, you should gradually increase the stimulation intensities until clearly visible muscle twitches are obtained.
For TENS, Epicondylitis and Tendinitis programmes, you should gradually increase the intensities until you feel a tingling sensation under the electrodes.

The question of the scheduling of the stimulation sessions during the week only arises in situations where at least two training sessions are to be done in the same week.

In cases where up to six sessions a week are planned, it is recommended that the sessions be scheduled as far apart as possible. For example, anyone who does three sessions a week should do them at the rate of one session every two days (2x1 rest day and  1x2 days of rest/week). Anyone who does six sessions should do six consecutive days of stimulation with one day of rest.

Above seven sessions a week, it is advisable to group several sessions together on the same day to leave yourself one or two complete rest days without stimulation. Anyone who does seven sessions a week should do five days of stimulation, at the rate of one session per day with one two-session day(s) (with at least a half-hour's rest between the sessions), leaving one rest day. Anyone who does ten sessions a week should preferably do five two-session days (again with at least a half-hour's rest between the sessions), leaving two rest days.

The stimulation sessions can be done outside of or during voluntary training.

When voluntary training and stimulation are done during the same session, it is generally recommended that the voluntary training be done first followed by the stimulation. This means that the voluntary training is not done on muscle fibres which are already tired. This is particularly important for strength and explosive strength training.

However, in resistance training, it can be very useful to proceed in the reverse order. Before the voluntary training, by means of stimulation for resistance, a “specific pre-fatigue session” is carried out on the muscle fibres without general and cardio-vascular fatigue. In this way, the voluntary effort on the “prepared” fibres will push the glycolytic metabolism faster and further.

The stimulation cycles are for people who are already accustomed to electrostimulation and want to perform several training cycles.

The cycle logic refers to the workload performed by electrostimulation. Just like a normal workout, one has to to start with an amount of effort then increase it over the course of the cycles. Thus, it is recommended starting with the 1st cycle and going on to the next level when the cycle is finished, normally after 4 to 6 weeks of stimulation based on 3 sessions per week.

It is also important to have reached significant stimulation intensities in sessions before going on to another cycle. At the end of a cycle you can either start a new cycle or do maintenance training based on one session per week.

Product Testimonials